Go to …
Additive Manufacturing and 3D Printing
|
Mechanical Properties in 3D-Printed Polymers: A Comparative Study of Carbon Fiber Reinforcement
Nathan Martinson, Utah Valley University |
View Document |
Evaluation of Acrylic Processing Aids to improve Interlayer Adhesion in 3D Printing
Manoj Nerkar, Dow Chemical |
View Document |
Novel Thermoset Formulations for Additive Manufacturing of Structures with Sparse Infill
Mitchell Delemeester, Michigan State University |
View Document |
Additive Manufacturing with Recycled Plastic Flakes for U. S. Military Applications
Prabhat Krishnaswamy, Engineering Mech Corp of Columbus |
View Document |
Influence of Thermoplastic Healing Agent Molecular Weight on Curing Behavior of a 3D Printable, Stimuli Responsive Polymer Blend
Vincent Mei, Rochester Institute of Technology |
View Document |
Experimental Investigation of Fracture Toughness of 3D-Printed Poly Lactide Acid (PLA) Parts Blended with Polybutylene Succinate (PBS) and Amorphous Polyhydroxy Alkenoates (PHA)
Milad Azami, University of Massachusetts Lowell |
Not Part of Proceedings |
Applied Rheology 2
|
Spring-Dashpot Models for Characterization of Polymer Deformation - An Old Tool for New Purposes
Pean-Yue Jar, University of Alberta |
View Document |
The Influence of Data Fitting on Capillary Rheology for Profile Extrusion Simulations
Nolan Lund, Intek Plastics |
View Document |
Thermoset Data Fitting for Reactive Molding Simulation Using a Semi-Automated Algorithm
Vishak Perumal, Autodesk |
View Document |
The Impact of Vacuum on Dynamic Void Evolution During the IC Packaging Process
Srikar Vallury, Moldex3D Northern America, Inc. |
Not Part of Proceedings |
A Perspective on the Time-Dependent Structure and Properties of Amorphous Polymer
Thomas Juska, ARL Penn State |
View Document |
Tailored Viscosity in Two-Part Acrylic Radical Cure Formulations
Graham Abramo, Dow Chemical |
View Document |
Composites and LightWeighting 3
|
Effect of Compatibilization in Engineering Compostable Biocomposites of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Reinforced with Cellulosic Fibers
Debarshi Nath, University of Guelph |
View Document |
A Comparison of Using Film Instead of Polymer Powder for Polypropylene Glass Fiber Composite Laminates
Philipp Brandes, Paderborn University |
View Document |
Enhancing Sustainability: Utilizing Recycled Carbon Fiber in Plastic Materials to Compete with Glass-Filled Plastics
Ryan Malatesta, Autodesk |
View Document |
Olive Stone Biochar for Tuning Mechanical and Piezoresistive Properties of Flax Fiber Composites
Sarina Schulte, Hochschule Hannover - University of Applied Sciences and Arts |
View Document |
Compression Molding Carbon Fiber Composite Components: Reducing Scrap Through Mixed Architecture
Swayam Shree, Michigan State University |
View Document |
Elastomers and Thermoplastic Elastomers
|
Epoxy Thermosets Toughened with Core Shell Rubber Particles
Hailan Guo, Dow Chemical Company |
View Document |
Effect of Thermal Degradation in Rubber Materials on Comparative Sealing Performance
Edward Cho, Korea University |
View Document |
Extensional DMA of Elastomers: Material Selection and Quality Control
Matthias Walluch, Anton Paar GmbH |
View Document |
An Anisotropic Hyperelastic-Plastic Material Model for the Process-Related Material Response of TPV
Noah Mentges, IKV at RWTH Aachen University |
View Document |
Peroxide Modification of Polyolefin Elastomers
Mercy Bulsari, University of Waterloo |
Not Part of Proceedings |
Medical Plastics
|
Fractional Skin Grafting: A Translational Tale About Engineering Innovation in Wound Healing
Walfre Franco, University of Massachusetts Lowell |
Not Part of Proceedings |
Integrating Sustainability into Medical Delivery Devices: Lifecycle Assessment, Sustainable Packaging, Takeback & Recycling
Zeming Gou, Eli Lilly & Co. |
View Document |
UHMWPE Membrane for Medical Applications: A Sustainable PFAS Free Alternative to ePTFE
Mark Hazzard, dsm-firmenich |
No Document Available |
On the Q10 Kinetic Model with Practical Applications in Medical Devices Industry: Theoretical Formalism and Technical Limitation
Xiaoping Guo, Abbott Laboratories |
View Document |
Process and Aging Considerations for Polymeric Catheter Devices
Danielle Harrier, Exponent |
Not Part of Proceedings |
Mold Technologies
|
Thermal and Flow Effects of Limescale on the Cooling of Slender Injection Molding Cores: A Numerical Study
Andrea Gruber, University of Massachusetts |
View Document |
Fast Cooling Simulation for the Generative Design of Injection Mold Cooling Layouts that Reduce Cycle-Time and Improve Part Quality
Christopher Blake, Maya HTT |
View Document |
Automatic Cooling Channel Layout Generation for Injection Molding
Clinton Kietzmann, Autodesk Australia Pty Ltd |
View Document |
Automatic Derivation of Conventional Cooling Channels for the Digital Thermal Injection Mold Design
Daniel Fritsche, Instite for Plastics Processing at RWTH Aachen University |
View Document |
Smart Hot Runner for Autonomous Sequential Molding
Julian Schild, Barnes Group Acquisition GmbH |
View Document |
Warpage Control Through Parallel Conformal Cooling Channels
Simon Wurzbacher Voestalpine |
View Document |
Polymer Analysis: Failure and Prevention
|
Lifespan Prediction of GFRP Subjected to Flexural Creep and Elevated Temperatures
Abdul Rahman Al hayek, Universiti Tenaga Nasional |
View Document |
Uncovering the Cause of the Unique Failure of Color-Coated PEXa Pipe
Florian Koschitzki, Plastic Expert Group |
View Document |
A Study of CPVC Fire Suppression Sprinkler Pipe Compatibility with Common Plasticizers Found in Wires and Cables
Gaurav Nagalia, Engineering Systems Inc. |
View Document |
Isothermal Characterization of Frequency-Dependent Fatigue of SFRTs with Uniformly Oriented Specimens
Hakan Celik, IKV at RWTH Aachen University |
View Document |
Effect of Void Content and Raster Orientation on Fracture and Fatigue Properties of Additively Manufactured Polymers
Md Abu Jafor, Baylor University |
Not Part of Proceedings |
Characterization of Polymeric Binders in High Friction Surface Treatments for Long-Term Durability Assessment
Sang Kim, Wiss, Janney, Elstner Associates |
View Document |
Twin-Screw Extrusion and Compounding
|
Silane Grafting of Polyethylene - Influence of Resin Structure and Grafting Conditions on Material Properties
Abhijit Ghosh-Dastidar, Dow Chemical |
View Document |
Twin Screw Optimization and Troubleshooting Expert Tips on Overcoming Process Limitations
Cameron Kheradi, Coperion Corporation |
View Document |
Relating Gearbox Condition to Processing Characteristics of Counter-Rotating Twin Screw Extruders
David Prieb, Milacron |
View Document |
How Do You Make Your Existing Compounding Plants Future-Ready?
Hans-Ulrich Siegenthaler, University of Applied Sciences of Western Switzerland - iRAP |
View Document |
Decreasing Hydrogen Fluoride Out-Gassing in Fluoropolymer Compounding
Sarah Blosch, AGC Chemicals Americas, Inc. |
Not Part of Proceedings |
Circular Leather Alternatives: Apple Pomace and Bio-based Polymers via Extrusion
Ahmad Ibrahim, CTT Group |
Not Part of Proceedings |
